Description
NEW! Connex by Wippermann 12sO 12-Speed Chain – 138 Link
Connex 12sO 12-Speed Chains
- Dimensions: 1/2″ x 11/128″
- Pin length: 5.40 mm
- Roller width: 2.10 mm
- Pin ejection pressure: >2000 N
- Pin hardening: XHB
- Links: 138
- Weight: 312 g
- Includes: CONNEX LINK
- For all 12-speed drivetrains (except SRAM Flattop)
🎬 Product overview video: Ditch the liquid!
Silca Super Secret WAXED
Technical details
• Saves up to 8w
• Fully compatible with Super Secret Chain Lube
• Clean to the touch on the chain
• No PFAS chemicals
• Get up to 25,000 km out of a chain
Pre-waxed chains go through our 4-step process to maximize the longevity of the wax coating:
- Removal of the factory-applied packing grease (3-step process) using an Ultrasonic Cleaner.
- Rinse With Alcohol and Fan dry
- Apply chains in the wax-heated bath for 15 minutes
- Run through our wax-shedding machine to lessen the mess.
Then, it was placed in the original repackaging.
Connex HOT WAXED
Technical details
· With SCA anti-wear additives
· Content: PTFE-free
· Minimizes dirt adhesion and wear,
with noise-reducing effect
· Fully compatible with Connex Liquid Wax Chain Lube
Pre-waxed chains go through our 4-step process to maximize the longevity of the wax coating:
- Removal of the factory-applied packing grease (3-step process) using an Ultrasonic Cleaner.
- Rinse With Alcohol and Fan dry
- Apply chains in the wax-heated bath for 15 minutes
- Run through our wax-shedding machine to lessen the mess.
Then, it was placed in the original repackaging.
If you’ve never used a paraffin-coated chain, you don’t know what you’re missing. Not only are they super fast, but they’re also extremely clean and oddly quiet. With a paraffin-coated chain, you’ll rarely need to clean your drive train, and your gear will last much longer. I strip the chains of all factory grease using a three-step cleaning process, and then I apply the wax to them.
The paraffin coating will last, on average, around 220 miles (350km) for most road riders and 125 miles (200km) for mountain bikers. The dryer the conditions, the longer it will last. Even in wet conditions, the wax will outperform any lube on the market. This leads us to the next recommendation.
The industry-standard best way to run a paraffin system is to rotate chains. For example, if you ride 700 miles (1,127km) a month, you’d be best rotating 3 chains. Use the first chain for about 10 days of riding, swap to your second chain for days 11-20 of riding, and when you get to the third chain, send us the first two chains to get re-waxed. But I personally just ride it until it makes noise, then swap it out. Typically, most people will get 2 years out of their chains using this system!
Note: It’s messy and is not for everyone!
Disclaimer:
- They will be shedding for about 5-10 miles, so do it outside.
- DO NOT EAT!
- Follow the manufacturer chain installation.
- To lengthen life, you can apply the bottle of Silca Seacret lube between services.
